HomeS2D project
PartsS2D project
BuildS2D project
DownloadS2D project
BuyS2D project
| Photo | Description | PCB Ref |
 |
PCB | |
 |
ATMEGA 328P-PU | IC1 |
 |
28 pin DIP IC Sockets Adapter | |
 |
0.1uF Ceramic Capacitor (3) | C1, C3, C7 |
 |
7805 Voltage Regulator IC + 5V 1.5A | U1 |
 |
47uF 25V Electrolytic Capacitors | C2 |
 |
100uF 6.3V Electrolytic Capacitors | C4 |
 |
1N4001 1A 50V Diode | D1 |
 |
16 MHZ Crystal Oscillator HC-49S | X1 |
 |
22pF Ceramic Capacitors (2) | C5, C6 |
 |
Reset Switch | SW1 |
 |
3mm Green LED | D2 |
 |
3mm Yellow LED | D3 |
 |
10K Ohm Resistor 1/4W 5% | R2 |
 |
1K Ohm Resistor 1/4W 5% (2) | R1, R3 |
 |
1×3 Female Header (2) | |
 |
1×6 Female Header (4) | |
 |
1×9 Female header (3) | |
 |
1×6 Male header | |
 |
1×3 male header | |
 |
XH2.54-2P | |
 |
2.1mm Barrel Jack | |
 |
Jumper |
Other Things you will need
- Soldering iron
- Solder
- Flush cutters
- FTDI Friend or similar
Optional (but highly recommended)
- Tape
- Project gripper
- Multi-meter